ads-1
Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 23050487 Construction Of Architecture Building At NIT Campus Trichy SH Providing Ac Power Wiring.
1,23,895.00
Due Date : 13/08/2020
MULTI STATE
2 Tenders: 23050393 Providing Comprehensive Architectural And Engineering Consultancy Services For Development Of 13.83 Acre Property Owned By The Govt Of Andhra Pradesh At Sy. No. 1011, Waltair Ward, Visakhapatnam.
4,72,29,000.00
Due Date : 20/08/2020
NEW DELHI
3 Tenders: 23049223 Thorough Attention Of Dwarka Mor And Dwarka Sector 13 Metro Station.. 4.1 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level : 4.1.2 1:1.5:3(1 Cement : 1.5 Coarse Sand (Zone Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size) 4.1.3 1:2:4 (1 Cement : 2 Coarse Sand (Zone Iii) : 4 Graded Stone Aggregate 20 Mm Nominal Size) 6.4 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 10.25 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting,Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 10.25.2 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 11.26.1 Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) : 11.26.1 25 Mm Thick 8.2 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. 8.2.2 Granite Of Any Colour And Shade 8.2.2.2 Area Of Slab Over 0.50 Sqm 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 11.37 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 11.41 "Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. " 11.41.2 Size Of Tile 600X600 Mm 13.4.1 "12 Mm Cement Plaster Of Mix : 13.4.1 1:4 (1 Cement: 4 Coarse Sand)" 13.52 Finishing With Epoxy Paint (Two Or More Coats) At All Locations Prepared And Applied As Per Manufacturer's Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. 13.52.1 On Steel Work 13.62 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 13.62.1 Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 15.18 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Metres Lead. 15.60 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer In Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 18.9 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling And Testing Of Joints Complete As Per Direction Of Engineer In Charge. 18.9.2 20 Mm Nominal Outer Dia Pipes 18.9.3 25 Mm Nominal Outer Dia Pipes 18.9.4 32 Mm Nominal Outer Dia Pipes 18.9.5 40 Mm Nominal Outer Dia Pipes 18.9.6 50 Mm Nominal Outer Dia Pipes 22.14.1 Grading Roof For Water Proofing Treatment With 22.14.1 Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) 8.32 Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminium Composite Panel Cladding, With Open Grooves For Linear As Well As Curvilinear Portions Of The Building , For All Heights And All Levels Etc. Including: (A) Structural Analysis And Design And Preparation Of Shop Drawings For Pressure Equalisation Or Rain Screen Principle As Required, Proper Drainage Of Water To Make It Watertight Including Checking Of All The Structural And Functional Design. (B) Providing, Fabricating And Supplying And Fixing Panels Of Aluminium Composite Panel Cladding In Pan Shape In Metalic Colour Of Approved Shades Made Out Of 4Mm Thick Aluminium Composite Panel Material Consisting Of 3Mm Thick Fr Grade Mineral Core Sandwiched Between Two Aluminium Sheets (Each 0.5Mm Thick). The Aluminium Composite Panel Cladding Sheet Shall Be Coil Coated, With Kynar 500 Based Pvdf / Lumiflon Based Fluoropolymer Resin Coating Of Approved Colour And Shade On Face # 1 And Polymer (Service) Coating On Face # 2 As Specified Using Stainless Steel Screws, Nuts, Bolts, Washers, Cleats, Weather Silicone Sealant, Backer Rods Etc. (C) The Fastening Brackets Of Aluminium Alloy 6005 T5 / Ms With Hot Dip Galvanised With Serrations And Serrated Washers To Arrest The Wind Load Movement, Fasteners, Ss 316 Pins And Anchor Bolts Of Approved Make In Ss 316, Nylon Separators To Prevent Bi Metallic Contacts All Complete Required To Perform As Per Specification And Drawing The Item Includes Cost Of All Material And Labour Component, The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Curtain Wall With Aluminium Composite Panel Cladding, Cleaning And Protection Of The Curtain Wall With Aluminium Composite Panel Cladding Till The Handing Over Of The Building For Occupation. Base Frame Work For Acp Cladding Is Payable Under The Relevant Aluminium Item.S The Contractor Shall Provide Curtain Wall With Aluminium Composite Panel Cladding, Having All The Performance Characteristics All Complete , As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineer In Charge. However, For The Purpose Of Payment, Only The Actual Area On The External Face Of The Curtain Wall With Aluminum Composite Panel Cladding (Including Width Of Groove) Shall Be Measured In Sqm. Up To Two Decimal Places. 12.45 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 5X10x0.50 Mm Of Required Length With Nuts And Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturer's Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : 12.45.1 12.5 Mm Thick Tapered Edge Gypsum Plain Board Conforming To Is: 2095 (Part I) : 2011 (Board With Bis Certification Marks) 12.52 Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams/ Sqm, Both Side Inclusive) Consisting Of Main "T" Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross "T" Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main "T" At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross "T" Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main "T" Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T Sections Shall Be Pre Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer In Charge. 12.52.2 Gi Metal Ceiling Lay In Perforated Tegular Edge Global White Color Tiles Of Size 595X595 Mm And 0.5 Mm Thick With 8 Mm Drop; Made Of Gi Sheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And 20% Perforation Area With 1.8 Mm Dia Holes And Having Nrc (Noise Reduction Coefficient ) Of 0.5, Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending And Perforation, And Backed With A Black Glass Fiber Acoustical Fleece. 12.52.4 12.5 Mm Thick Fully Perforated Gypsum Board Tile Made From Plasterboard Having Glass Fibre Conforming To Is: 2095 Part I, Of Size 595X595 Mm, Having Perforation Of 9.7X9.7 Mm At 19.4 Mm C/C With Center Borders Of 48 Mm And The Side Borders Of 30 Mm, Backed With Non Woven Tissue On The Back Side, Having An Nrc (Noise Reduction Coefficient) Of 0.79, With 50 Mm Resin Bonded Glass Wool Backing. 13.46.1 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 13.46.1 New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 14.72 Providing And Fixing Double Scaffolding System (Cup Lock Type) On The Exterior Side, Up To Seven Story Height Made With 40 Mm Dia M.S. Tube 1.5 M Centre To Centre, Orizontal And Vertical Tubes Joining With Cup And Lock System With M.S. Tubes, M.S. Tube Challies, M.S. Clamps And M.S. Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It There After .The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc Wherever Required For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineerin Charge .The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose .The Payment Will Be Made Once Rrespective Of Duration Of Scaffolding.
1,14,04,000.00
Due Date : 07/09/2020
NEW DELHI
4 Tenders: 23044173 Architectural Consultancy With Preparation Of Detail Project Report Of Town Hall Karauli, Distt. Karauli. Architecture/Interior Design.
14,00,000.00
Due Date : 13/08/2020
RAJASTHAN
5 Tenders: 23043418 Inviting Expression Of Interest For Empanelment Of One Or More Agencies For Town Planning And Architecture And Project Appraisal Consultancy Services On Work Basis. Architecture/Interior Design.
Refer Detail
Due Date : 28/08/2020
UTTAR PRADESH
6 Tenders: 23043195 Request For Proposal (Rfp) For Selection Of Architectural Consultant For Undertaking Design, Layout, Preparing Specifications And Supervision Of Civil Works For Multi Storied Office Building.
1,50,00,000.00
Due Date : 07/09/2020
MAHARASHTRA
7 Tenders: 23043137 Tender For Appointment Of Project Architect/Consultant For Interior Furnishing Work Of Office Premises At Sco 113 114 Urban Estate Ph Ii Jalandhar(Punjab).
Refer Detail
Due Date : 26/08/2020
PUNJAB
8 Tenders: 23041700 Package 10 Architectural Finishing For 7 Elevated Stations And Design Verification, Detailed Engineering, Supply, Installation, Testing And Commissioning Of Electrical And Mechanical Systems Of Delhi Ghaziabad Meerut Rrts Corridor. Corrigendum.
Refer Detail
Due Date : 20/08/2020
NEW DELHI
9 Tenders: 23039461 Construction Of Depot Infrastructures Comprising Stabling Yard, Operational Control Centre And Administrative Building, Maintenance And Workshop Buildings, Auxiliary Substation, Finishing, Plumbing, Earthworks For Land Development, Compound Wall, Road, Approach Bridge Elevated Viaduct Inside And Outside Connecting To First Floor Stabling And Underground Utility Duct Works Drainage,Rain Water Harvesting Etc. Complete [Including Architectural Finishing Works And Excluding Pre Engineered Structure Works] Excluding Peb Works For Elevated Car Depot At Mogharpada For Metro Lines 4, 4A, 10 And 11 Of Mumbai Metro Rail Project Of Mmrda.
5,96,60,33,035.00
Due Date : 21/09/2020
MAHARASHTRA
10 Tenders: 23035434 Empanelment Of Architect/Architectural Firms For Interior Furnishing Works/Electrical Installations/Composite Works Etc.
Refer Detail
Due Date : 25/08/2020
PUNJAB
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

FREE Business Opportunities Just a Click away


Company: *  
Name: *  
Email Id: *    
Phone No:
Mobile No: *  
 
 

Architect

Tenders information of Architect in India and Indian tenders for Architect, Tender document For Architect, Architect tenders, Architect Tender information, Live Tender for Architect, Closed Tender for Architect, Free Tender for Architect, Free Full Tender Details for Architect. Live Chat Available for tenders information.